[casper1978]

howyas,
well i picked up a 1980 cb900f to do as a project. I got it off my brother who had swapped his vfr750 (non runner)
for a cb 900 engine for the cb750 chopper that i had "sold" him. Long story short the money was never forth coming
so i took it back, and he said i could take the 900 too telling me that it was in the frame with the rear swing arm.
I was going to go original with it but when i went to pick it up the previous owner had made a streetfighter out
of it.
so i decieded to go with this theme and make it the best it can be.

Total engine strip down and over haul. I still have the tank, side panel and tail piece from when i built the cb750 chop.
So far i have the engine apart and tonight i started a little work on the frame.
Going to put in new main bearings, big end bearings, cam chain slippers and piston rings.

Heres the pics so far............

 Photo0444.jpg (445.74K)
Number of downloads: 9

different rear swing arm with mono shock
 Photo0446.jpg (426.01K)
Number of downloads: 7
 Photo0447.jpg (427.83K)
Number of downloads: 5

engine and frame seperated
 Photo0451.jpg (330.06K)
Number of downloads: 5

head and cylinder removed
 Photo0452.jpg (363.28K)
Number of downloads: 7

pistons ready for removal
 Photo0454.jpg (348.65K)
Number of downloads: 6
removed
 Photo0456.jpg (310.83K)
Number of downloads: 7

sump removed.....oil and water dont mix
 Photo0464.jpg (398.97K)
Number of downloads: 6

engine split.....looks good inside
 Photo0465.jpg (330.19K)
Number of downloads: 5

ready to remove the crank and start cleaning
 Photo0470.jpg (365.89K)
Number of downloads: 3

Attached File(s)

•  Photo0454.jpg (348.65K)
  Number of downloads: 1